![]() ![]() I rarely use the phone while driving, but on the Tesla it rings at full (Spotify) volume, so have to lower it. I got around that by using the cars Spotify instead. But the Tesla might treat it as one volume. If anybody has any suggestions for something else I could check I'd be very appreciative. The phone call and Spotify volumes are independent on the phone, and my other cars treat them as independent as well. Hearing thresholds at very high or ultrasonic frequencies are. So I re-openen the case and re-seated the two ribbons for the digitiser and screen data, which went on satisfactorily enough I thought, but having put it all back together again still nothing from the touch screen. The primary aim of the present study was to investigate whether inaudible US can. I had sucessfully fixed the power button and dock connector, as both of those work just fine, but not response from from the touch-screen at all. ![]() I unfolded it and put the whole thing back together,, however when I finally got the case back on and powered up I found that the screen didn't work at all. I could see that the digitizer cable from the new screen was slightly folded, which accounted for it's shortness. When I had re-stripped out the logic board, speaker assembly, vibrator etc. ![]() I, nor this forum, take any resposibility for damages to your iPhone if you attempt this process.I got as far as putting the logic board back in and noticed that one of the ribbons from the display was not sticking out far enough and so had to take it all to bits again to see what the problem was. My theory is that the piece of manila folder put just enough pressure on the internal components so that I did not have to manually do it.ĭISCLAIMER: This is just my fix. I pre-cut a piece of manila folder about one square inch, and layed it inside the back bottom right, and put the back glass back on. 2.4m Likes, 13.5k Comments - therock on Instagram: THIS IS HAWKMAN A pleasure to welcome aldishodge to BLACK ADAM. I unscrewed the bottom two screws and removed the back glass. Putting pressure back on, they can hear me. Sure enough, not one could hear me unless I pressed the right bottom of the ihone 4. ![]() While testing (facing the back glass), I made calls and put pressure on the left and right sides of the bottom of the iPhone 4. Put pressuse on left or right bottom corners of iPhone 4. In/Out calls work for a few seconds, then callers can't hear me all of a sudden.Īll other applications that use the iPhone microphone work, yet phone app on does not. SYMPTOMS (With Microphone, Ear Buds, or Bluetooth): I scoured the Internet for a fix, and I've found a few hints that narrowed my problem down. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |